Solenoid Type Remote Control Water Valve HK07
Introduction This series valve is famous for sensitive reaction and high pressure,Usually be used to circuit control board connection, it is good for energy saving,Widely used to IC card gas combustion meter, water saving irrigation, water meterand various automatic flushing of sanitary ware.The core of the valve can be pulled and stretched to be the good shape, with good strictness, credibility, sensitive reaction and long life.Using Conduction
Fluid Medium: Water, Gas (but not corrosive)
Fluids Temperature: ≤60ºC, please use at the area,
Which relative temperature can't over than 85%
How to use
To exchange the poles of the battery for on-off
Standard technical parameters
Body
Interface size: 3/8-2''
Flow diameter: 13-50mm
Body material: Wrought brass
Connection type: G thread
Pressure class: 0.5-10bar
Structure type: Pilot type
Control type: Normally closed
Components
Seal material: NBR
Medium temperature: 0ºC-60ºC
Ambient temperature: 0ºC-70ºC
Install way: According to the body tag to install, in order to enhance
the valve service life, better coil upward, horizontal installation;
Coil voltage: DC24V/12V, other voltage can be customized
| Pipe Size |
Flow Diameter
(mm)
|
Working Pressure
Range
(Kgf/cm2)
|
The Max.
Temperature
ºC
|
Outline dimension
|
Model |
| Length × Width × Height |
| 3/8" |
10 |
0.5-10
|
60
|
66×48×83 |
SLPM-10 |
| 1/2" |
15 |
66×48×83 |
SLPM-15 |
| 3/4" |
20 |
75×58×88 |
SLPM-20 |
| 1" |
25 |
96×70×101 |
SLPM-25 |
| 11/4" |
35 |
131×96×116 |
SLPM-32 |
| 11/2" |
40 |
|
|
131×96×116 |
SLPM-40 |
| 2" |
50 |
165×120×142 |
SLPM-50 |
